Descrizione
PCI Bus card
– Support both 3,3V and 5V PCI connector so suitable for PC and Servers
PCI Express Bus cards
– Compliant PCI Express 1x
Serial port specification
– Fast Serial RS232 DB9 port
– Serial Port Data rates up to 4Mbps per port
– PCI compatible Dual UART (16C450/550/552)
– PCI compatible Quad UART (16C550) for 4 Serial port
– 16-byte transmit-receive FIFO (UART)
– Programmable Baud rate generator
– Modem Control Signal
– 5,6,7,8 bit character selection
Parallel port specification
– DB25 Printer Port
– PCI compatible IEEE 1284 Printer Port
– Support SPP, Nibble, Byte, PS2, EPP, ECP, Multimode
– Fast data rate up to 2MB/s for PCI and 1,5MB/s for PCI-Express
Raid Controls
PCI express
– 2 x SATA 3 Gb/s Port
– 1 x ATA133 Channel (max. 2 HDD)
– Max. 3 Gb/s transfer rate per SATA port
– Support both SATA 1.5 Gb/s and 3 Gb/s HDDdrives
– PCI Express Base specifi cation rev.1.0a compliant
– Serial ATA AHCI specification rev.1.0 compliant
– Serial ATA High Speed Serialized AT Attachmentrev. 1.0a compliant
– Serial ATA II: Extensions to Serial ATA 1.0a Rev.1.1 complaint
– Gen2i and Gen2m Serial ATA II Electrical specification rev. 1.0 complaint
– Bus master programming interface for IDE ATAcontroller compliant
– Support RAID 0, 1, 0+1, JBOD or Non-RAID modes
– Supports Native Command Queue(NCQ)
– Support Hot Plug
– Drivers support Windows 7, 2000, ME/XP/VISTA, MAC OSX 10.4.3, Linux, Unix SCO/Solaris
PCI
– 1 x ATA133 IDE Channel
– 2 x SATA 1.5 Gb/s IDEPort
– PCI specification v2.2 compliant
– PCI Power Management Interface specification v.1.1 compliant
– RAID 0, 1, JBOD or Non-RAID modes support
– ATA IDE & SATA IDE RAID Drivers support Windows 98SE or above
ATA133
– Max. 2 IDE HDD support
– Support ATA PIO mode 4, multi-word DMA mode, &UDMA mode
– 6- ATA/ATAPI-7 compliant SATA
– Serial ATA specifi cation rev. 1.0 compliant
– Max. 1.5 Gb/s transfer rate per SATA port
